Window Defogger Wire: Repair

IF NECESSARY, REPAIR THE DEFOGGER WIRE
1. Clean the broken wire tips with grease, wax and silicone remover.
  
  Fig 1: Cleaning Broken Wire Tips With Grease
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Place the masking tape along both sides of the wire.
3. Thoroughly mix the repair agent (DuPont paste No. 4817 or equivalent).
4. Using a fine tip brush, apply a small amount of the agent to the wire.
  
  Fig 2: Applying Amount Of Agent To Wire
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
5. After a few minutes, remove the masking tape.
  NOTE: Do not repair the defogger wire again for at least 24 hours.