Front Speed Sensor: Installation

INSTALL FRONT SPEED SENSOR
1. Install the speed sensor front with the bolt.
  Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
  
  Fig 1: Identifying Speed Sensor Front With Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE: Prevent foreign matter from attaching to the sensor tip.
2. Install the speed sensor front with the 2 bolts and the clamp.
  Torque:
  
  Bolt A
  
  5.0 N*m (51 kgf*cm, 44 in.*lbf)
  
  Bolt B
  
  29 N*m (296 kgf*cm, 21 ft.*lbf)
  
  Fig 2: Identifying Speed Sensor Front With Bolts & Clamp
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  NOTE: Do not twist the sensor wire when installing the sensor.
3. Connect the speed sensor connector.
INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY LH (See INSTALLATION )
INSTALL FRONT WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
CHECK ABS SPEED SENSOR SIGNAL
HINT:

(See TEST MODE PROCEDURE ).