LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> RX 350 AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Steering Angle Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor: Removal

  1. PRECAUTION 

    HINT:

    See PRECAUTION

  2. SEPARATE BATTERY NEGATIVE TERMINAL 

    HINT:

    See PRECAUTION

  3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  4. REMOVE STEERING PAD  (See REMOVAL )
  5. REMOVE STEERING WHEEL ASSEMBLY (for Manual Tilt)  (See REMOVAL )
  6. REMOVE STEERING WHEEL ASSEMBLY (for Power Tilt and Power Telescopic)  (See REMOVAL )
  7. REMOVE STEERING COLUMN COVER (for Manual Tilt)  (See REMOVAL )
  8. REMOVE STEERING COLUMN COVER (for Power Tilt and Power Telescopic)  (See REMOVAL )
  9. REMOVE SPIRAL CABLE  (See REMOVAL )
  10. REMOVE STEERING ANGLE SENSOR 
    1. Release 6 claw fittings and remove the steering angle sensor from the spiral cable.
      Fig 1: Identifying Claws On Steering Angle Sensor
      G05241760Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals