Fuel Pump Resistor: Installation

INSTALL FUEL PUMP RESISTOR
1. Install the fuel pump resistor with the nut.
  Torque: 7.5 N*m (76 kgf*cm, 66 in.*lbf)
  
  Fig 1: Identifying Fuel Pump Resistor & Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the connector to the fuel pump resistor.
INSTALL ENGINE ROOM COVER SIDE (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization procedure (See INITIALIZATION ).
  HINT:
  
  Some systems need initialization after reconnecting the cable to the negative battery terminal.