Service Data
SERVICE DATA - MF2A TRANSFER
| Driven pinion preload (For use with SST(s)) | New bearing | 1.1 to 1.6 N*m (11 to 16 kgf*cm, 9.7 to 14.2 in.*lbf) |
| Used bearing | 0.9 to 1.4 N*m (9 to 14 kgf*cm, 8.0 to 12.4 in.*lbf) | |
| Total preload (For use with SST(s)) | New bearing | 1.30 to 1.98 N*m (13.3 to 20.2 kgf*cm, 11.5 to 17.5 in.*lbf) |
| Used bearing | 1.07 to 1.68 N*m (10.9 to 17.1 kgf*cm, 9.5 to 14.9 in.*lbf) | |
| Ring gear | Backlash | 0.10 to 0.15 mm (0.0039 to 0.0059 in.) |
| Ring gear runout | Maximum | 0.1 mm (0.004 in.) |
| Transfer ring gear mounting case | Maximum | 0.03 mm (0.0012 in.) |
| Washer thickness LH side | Mark | - |
| AA | 2.07 mm (0.0814 in.) | |
| AB | 2.10 mm (0.0826 in.) | |
| AC | 2.13 mm (0.0838 in.) | |
| BA | 2.16 mm (0.0850 in.) | |
| BB | 2.19 mm (0.0862 in.) | |
| BC | 2.22 mm (0.0874 in.) | |
| CA | 2.25 mm (0.0885 in.) | |
| CB | 2.28 mm (0.0897 in.) | |
| CC | 2.31 mm (0.0909 in.) | |
| DA | 2.34 mm (0.0921 in.) | |
| DB | 2.37 mm (0.0933 in.) | |
| DC | 2.40 mm (0.0944 in.) | |
| EA | 2.43 mm (0.0956 in.) | |
| EB | 2.46 mm (0.0968 in.) | |
| EC | 2.49 mm (0.0980 in.) | |
| FA | 2.52 mm (0.0992 in.) | |
| FB | 2.55 mm (0.1003 in.) | |
| FC | 2.58 mm (0.1015 in.) | |
| GA | 2.61 mm (0.1027 in.) | |
| GB | 2.64 mm (0.1039 in.) | |
| GC | 2.67 mm (0.1051 in.) | |
| HA | 2.70 mm (0.1062 in.) | |
| HB | 2.73 mm (0.1074 in.) | |
| HC | 2.76 mm (0.1086 in.) | |
| JA | 2.79 mm (0.1098 in.) | |
| JB | 2.82 mm (0.1110 in.) | |
| JC | 2.85 mm (0.1122 in.) | |
| KA | 2.88 mm (0.1133 in.) | |
| KB | 2.91 mm (0.1145 in.) | |
| KC | 2.94 mm (0.1157 in.) | |
| LA | 2.97 mm (0.1169 in.) | |
| LB | 3.00 mm (0.1181 in.) | |
| Driven pinion bearing washer thickness front side | Mark | - |
| AA | 1.20 mm (0.0472 in.) | |
| AC | 1.22 mm (0.0480 in.) | |
| BB | 1.24 mm (0.0488 in.) | |
| CA | 1.26 mm (0.0496 in.) | |
| CC | 1.28 mm (0.0503 in.) | |
| DB | 1.30 mm (0.0511 in.) | |
| EA | 1.32 mm (0.0519 in.) | |
| EC | 1.34 mm (0.0527 in.) | |
| FB | 1.36 mm (0.0535 in.) | |
| GA | 1.38 mm (0.0543 in.) | |
| GC | 1.40 mm (0.0551 in.) | |
| HB | 1.42 mm (0.0559 in.) | |
| JA | 1.44 mm (0.0566 in.) | |
| JC | 1.46 mm (0.0574 in.) | |
| KB | 1.48 mm (0.0582 in.) | |
| LA | 1.50 mm (0.0590 in.) | |
| LC | 1.52 mm (0.0598 in.) | |
| MB | 1.54 mm (0.0606 in.) | |
| NA | 1.56 mm (0.0614 in.) | |
| NC | 1.58 mm (0.0622 in.) | |
| PB | 1.60 mm (0.0629 in.) | |
| QA | 1.62 mm (0.0637 in.) | |
| QC | 1.64 mm (0.0645 in.) | |
| Washer thickness RH side | Mark | - |
| AA | 1.47 mm (0.0578 in.) | |
| AB | 1.50 mm (0.0590 in.) | |
| AC | 1.53 mm (0.0602 in.) | |
| BA | 1.56 mm (0.0614 in.) | |
| BB | 1.59 mm (0.0625 in.) | |
| BC | 1.62 mm (0.0637 in.) | |
| CA | 1.65 mm (0.0649 in.) | |
| CB | 1.68 mm (0.0661 in.) | |
| CC | 1.71 mm (0.0673 in.) | |
| DA | 1.74 mm (0.0685 in.) | |
| DB | 1.77 mm (0.0696 in.) | |
| DC | 1.80 mm (0.0708 in.) | |
| EA | 1.83 mm (0.0720 in.) | |
| EB | 1.86 mm (0.0732 in.) | |
| EC | 1.89 mm (0.0744 in.) | |
| FA | 1.92 mm (0.0755 in.) | |
| FB | 1.95 mm (0.0767 in.) | |
| FC | 1.98 mm (0.0779 in.) | |
| GA | 2.01 mm (0.0790 in.) | |
| GB | 2.04 mm (0.0803 in.) | |
| GC | 2.07 mm (0.0814 in.) | |
| HA | 2.10 mm (0.0826 in.) | |
| HB | 2.13 mm (0.0838 in.) | |
| HC | 2.16 mm (0.0850 in.) | |
| JA | 2.19 mm (0.0862 in.) | |
| JB | 2.22 mm (0.0874 in.) | |
| JC | 2.25 mm (0.0885 in.) | |
| KA | 2.28 mm (0.0897 in.) | |
| KB | 2.31 mm (0.0909 in.) | |
| KC | 2.34 mm (0.0921 in.) | |
| LA | 2.37 mm (0.0933 in.) | |
| LB | 2.40 mm (0.0944 in.) | |
| LC | 2.43 mm (0.0956 in.) | |
| MA | 2.46 mm (0.0968 in.) | |
| MB | 2.49 mm (0.0980 in.) | |
| MC | 2.52 mm (0.0992 in.) | |
| NA | 2.55 mm (0.1003 in.) | |
| NB | 2.58 mm (0.1015 in.) |