Typical Enabling Conditions
All:
TYPICAL ENABLING CONDITIONS
| Monitor will run whenever these DTCs are not present. | P0100, P0102, P0103 (MAF Sensor) |
ECT sensor cold start monitor:
TYPICAL ENABLING CONDITIONS
| Battery voltage | 10.5 V or more |
| Time after engine start | 1 second or more |
| ECT at engine start | Less than 60°C (140°F) |
| IAT sensor circuit | OK |
| Soak time | 5 hours or more |
| Accumulated MAF | 1,421.2 g or more |
| Engine | Running |
| Fuel cut | OFF |
| Difference between ECT at engine start and IAT | Less than 40°C (72°F) |
ECT sensor soak monitor:
TYPICAL ENABLING CONDITIONS
| Battery voltage | 10.5 V or more |
| Engine | Running |
| Soak time | 5 hours or more |
| ECT at engine start | 60°C (140°F) or more |
| Accumulated MAF | 3,298.1 g or more |