Ignition Coil: Removal
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
- REMOVE NO. 1 ENGINE UNDER COVER
- REMOVE ENGINE ROOM COVER SIDE
(See REMOVAL
)
- REMOVE V-BANK COVER SUB-ASSEMBLY
(See REMOVAL
)
- DRAIN ENGINE COOLANT
(See ON-VEHICLE INSPECTION
)
- REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY
(See REMOVAL
)
- REMOVE COWL TOP PANEL OUTER SUB-ASSEMBLY
(See REMOVAL
)
- REMOVE AIR CLEANER CAP SUB-ASSEMBLY
(See REMOVAL
)
- REMOVE INTAKE AIR SURGE TANK ASSEMBLY
(See REMOVAL
)
- REMOVE NO. 1 SURGE TANK STAY
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the bolt and disconnect the harness clamp.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the bolt and No. 1 surge tank stay.
- REMOVE IGNITION COIL ASSEMBLY
- Disconnect the 6 ignition coil connectors.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Remove the 6 bolts and 6 ignition coils.