Height Control Sensor: Installation

INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY FRONT LH
1. Install the height control sensor FR LH with the 2 nuts.
  Torque: 7.8 N*m (80 kgf*cm, 69 in.*lbf)
  
  Fig 1: Identifying Nuts On Height Control Sensor FR LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the height control sensor onto the lower arm with the torx nut.
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  Fig 2: Identifying Torx Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the connector.
INSTALL FRONT WHEELS
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)
ADJUST VEHICLE HEIGHT
INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR LH (2WD DRIVE TYPE)
1. Install the height control sensor RR LH with the "torx" nut and the 2 nuts.
  Torque:
  
  7.8 N*m (80 kgf*cm, 69 in.*lbf) (Nut)
  
  5.4 N*m (55 kgf*cm, 48 in.*lbf) ("Torx")
  
  Fig 3: Identifying Torx Nut & Nut On Height Control Sensor RR LH
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL HEIGHT CONTROL SENSOR SUB-ASSEMBLY REAR LH (4WD DRIVE TYPE)
1. Install the height control sensor RR LH with the "torx" nut and the 2 bolts.
  Torque:
  
  7.8 N*m (80 kgf*cm, 69 in.*lbf) (Bolt)
  
  5.4 N*m (55 kgf*cm, 48 in.*lbf) ("Torx" nut)
  
  Fig 4: Identifying Height Control Sensor RR LH With Torx Nut & Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
ADJUST VEHICLE HEIGHT