Front Speed Sensor: Inspection

1. Inspect the front speed sensor. If any of the following occurs, replace the front speed sensor with a new one:
   • The surface of the front speed sensor is cracked, dented, or chipped off.
   • The connector or wire harness is scratched, cracked, or damaged.
   • The front speed sensor has been dropped.
2. Measure the resistance according to the value(s) in the table below.
   Fig 1: Inspecting Front Speed Sensor

   Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

   Resistance 

   LH 

   TESTER CONNECTION SPECIFIED CONDITION CHART
   
   

   Tester Connection	Specified Condition
   2 (FL+) - 1 (FL-)	1.4 to 1.8 kΩ

   RH 

   TESTER CONNECTION SPECIFIED CONDITION CHART
   
   

   Tester Connection	Specified Condition
   2 (FR+) -1 (FR-)	1.4 to 1.8 kΩ

3. Measure the resistance according to the value(s) in the table below.

Resistance 

LH 

RH