Brake Pedal Stroke Sensor: Inspection

1. Inspect the brake pedal stroke sensor assembly. If any of the following occurs, replace with a new brake pedal stroke sensor assembly:
   • The surface of the brake pedal stroke sensor assembly is cracked, dented, or chipped off.
   • The connector is scratched, cracked, or damaged.
   • The brake pedal stroke sensor assembly has been dropped.
2. Measure the resistance according to the value(s) in the table below.
Fig 1: Identifying Brake Master Stroke Simulator Cylinder Assembly Connector Terminal
Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.

Resistance