Brake Pedal Stroke Sensor: Removal

PRECAUTION
(See AIRBAG SYSTEM )
DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
(See AIRBAG SYSTEM )
REMOVE FRONT DOOR SCUFF PLATE LH (See REMOVAL )
REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (See REMOVAL )
REMOVE INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY LOWER (See REMOVAL )
REMOVE DRIVER SIDE KNEE AIRBAG ASSEMBLY (See REMOVAL )
REMOVE BRAKE PEDAL STROKE SENSOR ASSEMBLY
1. Disconnect the brake pedal stroke sensor assembly connector.
  
  Fig 1: Locating Brake Pedal Stroke Sensor Assembly Connector
  Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
2. Remove the 2 bolts and the brake pedal stroke sensor assembly.