Inspection Procedure
NOTE:
When replacing the skid control ECU assembly, perform initialization of the linear solenoid valve and calibration (See
INITIALIZATION ).
- CHECK DTC (HYBRID CONTROL SYSTEM)
- Check if DTC for the HYBRID CONTROL SYSTEM is output (See DTC CHECK / CLEAR ).
Result
RESULT CHARTCondition Proceed To DTC is not output A DTC is output B B: REPAIR HYBRID CONTROL SYSTEM
A: Go to next step
- CHECK DTC (ELECTRONICALLY CONTROLLED BRAKE SYSTEM)
- Check if C1300/- is output (See DTC CHECK / CLEAR ).
Result
RESULT CHARTCondition Proceed To C1300/- is not output A C1300/- is output B B: GO TO DTC C1300/-
A: REPLACE SKID CONTROL ECU