LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake Control >> Steering Angle Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Steering Angle Sensor: Removal

  1. PRECAUTION 

    (See AIRBAG SYSTEM )

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 

    (See AIRBAG SYSTEM )

  3. PLACE FRONT WHEELS FACING STRAIGHT AHEAD 
  4. REMOVE STEERING WHEEL NO.2 COVER LOWER  (See REMOVAL )
  5. REMOVE STEERING WHEEL NO.3 COVER LOWER  (See REMOVAL )
  6. REMOVE STEERING PAD  (See REMOVAL )
  7. REMOVE STEERING WHEEL ASSEMBLY  (See REMOVAL )
  8. REMOVE STEERING COLUMN COVER (for Manual Tilt)  (See REMOVAL )
  9. REMOVE STEERING COLUMN COVER (for Power Tilt and Power Telescopic)  (See REMOVAL )
  10. REMOVE SPIRAL CABLE SUB-ASSEMBLY WITH STEERING ANGLE SENSOR  (See REMOVAL )
  11. REMOVE STEERING ANGLE SENSOR 
    1. Disengage the 6 claws and remove the steering angle sensor from the spiral cable sub-assembly.
      2. Fig 1: Identifying Steering Angle Sensor
      G05276996Courtesy of TOYOTA MOTOR SALES, U.S.A., INC.
scientia non olet · About LEMON Manuals