LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Engine Control System (3MZ-FE)) >> SFI System >> Inspection Mode Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Inspection Mode Procedure

WARNING: This page is about a different car, the 2006 Lexus RX 400h. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

Before performing the DATA LIST and ACTIVE TEST of the engine with the intelligent tester, be sure to put the system into the inspection mode using the following procedures.

  1. ACTIVATING INSPECTION MODE 
    1. Perform the following steps (1) through (4) in 60 seconds.
      1. Turn the ignition switch ON.
      2. Fully depress the accelerator pedal twice with the transmission in the P position.
      3. Fully depress the accelerator pedal twice with the transmission in the N position.
      4. Fully depress the accelerator pedal twice with the transmission in the P position.
      5. Check that the "FWD MAINTENANCE MODE" on the multi-information display and master warning light is illuminated in the combination meter.
      6. Start the engine.
scientia non olet · About LEMON Manuals