LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> RX 400h AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 245 (Introduction) >> Repair Instruction >> Customize Parameters
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Customize Parameters

WARNING: This page is about a different car, the 2008 Toyota Yaris. However, it is still accessible from the selected car via links, so may be relevant.

HINT:

The following can be customized.

NOTE:
  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.
  1. THEFT DETERRENT SYSTEM 

    Theft Deterrent System (for Sedan) 

    THEFT DETERRENT SYSTEM TABLE

    Display (Item) Default Contents Setting
    Passive Mode
    (Security system) (Passive Arming Mode)
    OFF In passive arming mode, theft deterrent system switched from arming preparation state to armed state 30 seconds after both of following operations performed.
    • Key removed from ignition key cylinder
    • All doors closed (not locked)

    In passive arming mode, if following operations are not performed within 14 seconds of door being opened while in armed state, theft deterrent system determines that condition as theft and switches to alarm arming sounding state.
    • Battery reconnected
    • Key inserted into ignition key cylinder and ignition switch turned from OFF to ON
    • Any door unlocked using key
    ON/OFF
    Warning by Horn
    (Warning horn)
    ON Allows vehicle horn and security horn to be used as warning devices ON/OFF
    Entry Delay Time
    (Entry delay time)
    14 seconds Changes entry delay time (time before warning starts) for passive arming mode 0/14/30 (seconds)
  2. LIGHTING SYSTEM 

    Main Body (Main Body ECU) 

    ILLUMINATED ENTRY TABLE

    Display (Item) Default Contents Setting
    Lighting Time 15 seconds Changes illumination duration after door closure. (It will quickly fade out in case of turning the ignition switch ON.) 7.5 seconds / 15 seconds / 30 seconds
    I/L ON / ACC OFF ON Illuminates light when ignition switch turned on (ACC). (Room light illuminated when interior light switch in DOOR position) ON/OFF
    I/L ON / UNLOCK ON Function to light up the room light, when unlocking with the door key cylinder. (Room light illuminated when interior light switch in DOOR position) ON/OFF

    HINT:

    Sensitivity adjustments are difficult to confirm. Check by driving the customer's vehicle.

  3. POWER DOOR LOCK CONTROL SYSTEM 

    Power Door Lock Control System 

    POWER DOOR LOCK CONTROL SYSTEM TABLE

    Display (Item) Default Contents Setting
    UNLK/KEY TWICE ON Unlocks only driver side door when driver side door key cylinder turned to unlocks once, and unlocks all doors when turned to unlock twice. For OFF setting, turning it once unlocks all doors ON / OFF
  4. WIRELESS DOOR LOCK CONTROL SYSTEM 

    Main Body (Main Body ECU) 

    WIRELESS DOOR LOCK CONTROL SYSTEM TABLE

    Display (Item) Default Contents Setting
    Hazard Answer Back ON When wireless lock switch on transmitter pressed, illuminates all hazard warning lights once. When unlock switch pressed, all hazard warning lights illuminate twice ON / OFF
    Wireless Control ON ON / OFF of wireless door lock function ON / OFF
    Panic Function ON Operates security alarm when panic switch on transmitter continuously pressed for 1 second ON / OFF
    Unlock / 2 Operation All door Function that unlocks driver side door when unlock switch on transmitter is pressed once, and unlocks all doors when pressed twice, if setting is OFF, pressing unlock switch once makes all doors unlock. ON / OFF
    Auto Lock Time 30 seconds Time until relocking after unlocking with wireless door lock function 60 seconds/ 30 seconds
  5. GAUGE SYSTEM (INCLUDING SEAT BELT WARNING) 

    Combination Meter Assembly 

    COMBINATION METER ASSEMBLY REFERENCE TABLE

    Display (Item) Default Contents Setting
    Key Remind Sound NORMAL Changes key reminder buzzer intervals FAST / NORMAL / SLOW
    Light Remind ON Turns key reminder light ON and OFF ON / OFF
    Seat belt Warning D/P ON Turns seat belt warning buzzer ON and OFF D/P ON / D ON / P ON / D/P OFF