Camshaft Timing Oil Control Valve Assembly: Installation

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
1. Install the 2 camshaft timing oil control valves with the 2 bolts.
  Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
  
  Fig 1: Identifying Camshaft Timing Oil Control Valve Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 2 connectors.
INSTALL INTAKE AIR SURGE TANK (See INSTALLATION )
INSTALL NO. 2 SURGE TANK STAY (See INSTALLATION )
INSTALL NO. 1 SURGE TANK STAY (See INSTALLATION )
INSTALL OIL BAFFLE PLATE (See INSTALLATION )
INSTALL THROTTLE BODY BRACKET (See INSTALLATION )
INSTALL AIR CLEANER ASSEMBLY (See INSTALLATION )
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 3.9 N*m (40 kgf*cm, 35 in.*lbf)
ADD ENGINE COOLANT (See REPLACEMENT )
CHECK FOR ENGINE COOLANT LEAK (See REPLACEMENT )
INSTALL V-BANK COVER (See INSTALLATION )