Torque Specifications
TORQUE SPECIFICATIONS - 3MZ-FE ENGINE MECHANICAL
| Part Tightened | N*m | kgf*cm | ft.*lbf | |
|---|---|---|---|---|
| Front wheel | 103 | 1,050 | 76 | |
| Engine wire harness x Cylinder head cover | 8.4 | 85 | 74 in.*lbf | |
| Engine wire harness protector x Cylinder head cover | 8.4 | 85 | 74 in.*lbf | |
| Ignition coil assembly x Cylinder head cover | 8.0 | 80 | 71 in.*lbf | |
| Intake air surge tank x Intake manifold | 28 | 286 | 21 | |
| Surge tank stay No.2 x Intake air control valve assembly | 20 | 200 | 14 | |
| Surge tank stay No.2 x Cylinder head | 20 | 200 | 14 | |
| Surge tank stay No.1 x Intake air surge tank | 20 | 200 | 14 | |
| Surge tank stay No.1 x Cylinder head | 20 | 200 | 14 | |
| Engine hanger No.1 x Intake air surge tank | 20 | 200 | 14 | |
| Engine hanger No.1 x Cylinder head | 20 | 200 | 14 | |
| Emission control valve set x Emission control valve bracket | 8.0 | 82 | 71 in.*lbf | |
| Engine hanger No.2 x Cylinder head | 20 | 200 | 14 | |
| Engine oil pressure switch assembly x Cylinder block | 15 | 153 | 11 | |
| Engine mounting bracket RH x Cylinder block | 54 | 551 | 40 | |
| Manifold stay No.2 x Cylinder block | 49 | 500 | 36 | |
| Engine mounting bracket RR x Cylinder block | 64 | 653 | 47 | |
| Engine mounting insulator RH x Engine mounting bracket RH | 95 | 969 | 70 | |
| Engine mounting insulator LH x Automatic transaxle assembly | 95 | 969 | 70 | |
| Engine mounting insulator FR x Engine mounting bracket FR | 87 | 887 | 64 | |
| Engine mounting insulator RR x Engine mounting bracket RR | 75 | 765 | 55 | |
| Frame side rail plate sub-assembly x Front frame assembly | Bolt A | 85 | 867 | 63 |
| Bolt B | 32 | 326 | 24 | |
| Nut | 32 | 326 | 24 | |
| Front suspension member brace rear x Front frame assembly | Bolt C | 85 | 867 | 63 |
| Bolt D | 32 | 326 | 24 | |
| Nut | 32 | 326 | 24 | |
| Engine mounting stay No.2 RH x Engine mounting bracket RH | 64 | 653 | 47 | |
| Engine moving control rod | Bolt A to C | 64 | 653 | 47 |
| Bolt D | 23 | 235 | 17 | |
| Exhaust manifold converter sub-assembly x Cylinder head | 49 | 500 | 36 | |
| Manifold stay x Exhaust manifold converter sub-assembly | 34 | 347 | 25 | |
| Manifold stay x Automatic transaxle assembly | 34 | 347 | 25 | |
| Exhaust manifold heat insulator No.1 x Exhaust manifold converter sub-assembly | 8.5 | 87 | 75 in.*lbf | |
| Water outlet x Cylinder head | 15 | 153 | 11 | |
| Intake manifold x Cylinder head | 15 | 153 | 11 | |
| Ground cable x Intake manifold | 8.4 | 86 | 74 in.*lbf | |
| Wire harness clamp bracket x Cylinder head | 5.4 | 55 | 48 in.*lbf | |
| Ground cable x Cylinder head | 5.4 | 55 | 48 in.*lbf | |
| Exhaust manifold converter sub-assembly No.2 x Cylinder head | 49 | 500 | 36 | |
| Exhaust manifold heat insulator No.2 x Exhaust manifold converter sub-assembly No.2 | 8.5 | 87 | 75 in.*lbf | |
| Manifold converter insulator No.3 x Exhaust manifold converter sub-assembly No.2 | 8.5 | 87 | 75 in.*lbf | |
| Air cleaner case w/ resonator x Air cleaner bracket | 5.0 | 51 | 44 in.*lbf | |
| Air cleaner cap w/ inlet x Radiator support sub-assembly upper | 7.0 | 71 | 62 in.*lbf | |
| Battery clamp x Body | 5.4 | 55 | 48 in.*lbf | |
| Battery carrier sub-assembly x Body | 19 | 194 | 14 | |
| Brake master cylinder reservoir sub-assembly x Reservoir bracket | 9.0 | 92 | 80 in.*lbf | |
| Air cleaner bracket x Water outlet | 15 | 153 | 11 | |
| Compressor w/ motor assembly x Compressor mounting bracket No.1 | 25 | 250 | 18 | |
| Cooling fan ECU x Fan shroud | 2.6 | 26 | 23 in.*lbf | |
| Transmission control cable bracket x Shift lever position sensor | 6.9 | 70 | 61 in.*lbf | |
| Heater water pump bracket x Heater water pump | 5.4 | 55 | 48 in.*lbf | |
| Inverter bracket No.1 x Hybrid transaxle | 21 | 214 | 15 | |
| Transmission input damper assembly x Fly wheel sub-assembly | 30 | 306 | 22 | |
| Fly wheel sub-assembly x Crankshaft | 83 | 846 | 61 | |
| Engine mounting stay bracket x Cylinder block | 52 | 530 | 38 | |
| Compressor mounting bracket No.1 x Cylinder block | 25 | 250 | 18 | |
| Intake air connector bracket No.2 x Cylinder head | 7.0 | 71 | 62 in.*lbf | |
| Ventilation valve sub-assembly x Cylinder head cover sub-assembly | 27 | 275 | 20 | |
| Spark plug x Cylinder head assembly | 25 | 255 | 18 | |
| Cylinder head cover x Cylinder head assembly | 12.0 | 122 | 9 in.*lbf | |
| Oil level gage guide x Cylinder block assembly | 8.0 | 82 | 71 in.*lbf | |
| VVT sensor x Cylinder head assembly | 8.0 | 82 | 71 in.*lbf | |
| Camshaft timing oil control valve assembly x Cylinder head assembly | 8.0 | 82 | 71 in.*lbf | |
| Timing belt tensioner assembly x Oil pump assembly | 27 | 275 | 20 | |
| Timing belt No.2 cover x Timing belt No.3 cover | 9.0 | 92 | 80 in.*lbf | |
| Timing belt No.1 cover x Oil pump assembly | 9.0 | 92 | 80 in.*lbf | |
| Crankshaft pulley x Crankshaft | 220 | 2,243 | 162 | |
| Timing belt plate x Oil pump assembly | 8.0 | 82 | 71 in.*lbf | |
| Water pump assembly x Cylinder block assembly | 8.0 | 82 | 71 in.*lbf | |
| Timing belt idler bracket x Cylinder block assembly | 28 | 286 | 21 | |
| Timing belt No.3 cover x Cylinder head assembly | 9.0 | 92 | 80 in.*lbf | |
| Timing belt idler sub-assembly No.2 x Timing belt idler bracket | 43 | 438 | 32 | |
| Timing belt idler sub-assembly No.1 x Cylinder block assembly | 34 | 347 | 25 | |
| Crank position sensor x Oil pump assembly | 8.0 | 82 | 71 in.*lbf | |
| Camshaft timing pulley x Camshaft | 125 | 1,275 | 92 | |
| Cylinder head assembly x Cylinder block assembly | 12 pointed head 1st | 54 | 551 | 40 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Recessed head | 19 | 189 | 14 | |
| Camshaft timing gear assembly (VVT-i) x Camshaft | 150 | 1,530 | 111 | |
| Camshaft bearing cap x Cylinder head assembly | 16 | 163 | 12 | |
| Oil control valve filter x Cylinder head assembly | 45 | 459 | 33 | |
| Cylinder head cover rear x Cylinder head assembly | 10 | 102 | 7 | |
| Engine hanger No.2 x Cylinder head LH | 20 | 204 | 15 | |
| Engine rear oil seal retainer x Cylinder block | 8.0 | 82 | 71 in.*lbf | |
| Oil pump assembly x Cylinder block assembly | for bolt A | 8.0 | 82 | 71 in.*lbf |
| for bolt B | 20 | 204 | 15 | |
| for bolt C | 43 | 438 | 32 | |
| Oil pan sub-assembly x Cylinder block | 10 mm head | 8.0 | 82 | 71 in.*lbf |
| 12 mm head | 20 | 204 | 15 | |
| Oil strainer sub-assembly x Oil pan sub-assembly | 8.0 | 82 | 71 in.*lbf | |
| Oil pan sub-assembly No.2 x Oil pan sub-assembly | 8.0 | 82 | 71 in.*lbf | |
| Oil pan drain plug x Oil pan sub-assembly No.2 | 45 | 459 | 33 | |
| Water inlet housing x Cylinder block | 8.0 | 82 | 71 in.*lbf | |
| Oil filter union x Cylinder block assembly | 30 | 306 | 22 | |
| Camshaft sub-gear x Main gear | 5.0 | 51 | 44 in.*lbf | |
| Engine mounting bracket RH x Cylinder block | 28 | 286 | 21 | |
| W/ head straight screw plug No.1 x Cylinder head assembly | 44 | 449 | 32 | |
| W/ head straight screw plug No.2 x Cylinder head assembly | 44 | 449 | 32 | |
| Oil pan baffle plate x Oil pan sub-assembly | 8.0 | 82 | 71 in.*lbf | |
| Connecting rod cap x Connecting rod | 1st | 25 | 255 | 18 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| Cylinder block water drain cock sub-assembly x Cylinder block | 39 | 398 | 29 | |
| Cylinder block w/ head straight screw plug No.1 x Cylinder block | 30 | 306 | 22 | |
| Cylinder block w/ head straight screw plug No.2 x Cylinder block | 30 | 306 | 22 | |
| Cylinder block w/ head straight screw plug No.3 x Cylinder block | 50 | 510 | 37 | |
| Water seal plate x Cylinder block | 18 | 184 | 13 | |
| Crankshaft bearing cap x Cylinder block assembly | 12 pointed head 1st | 22 | 224 | 16 |
| 2nd | Turn 90° | Turn 90° | Turn 90° | |
| 6 pointed head | 27 | 275 | 20 | |
| Bearing cap bolt x Crankshaft berating cap | 27 | 275 | 20 | |