Crankshaft Position Sensor: Inspection

WARNING: This page is about a different car, the 2008 Toyota FJ Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

INSPECT CRANKSHAFT POSITION SENSOR
1. Check the resistance.
  1. Using an ohmmeter, measure the resistance between the terminals.
    Standard resistance: 1,850 to 2,450 Ω at 20°C (68°F)
    
    If the result is not as specified, replace the crankshaft position sensor.
    
    Fig 1: Identifying Resistance Between Crankshaft Position Sensor Terminals
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002