Display Check Mode

HOW TO PERFORM COLOR BAR CHECK
HINT:
- This mode checks the color display of the multi-display.
- Illustrations may differ from the actual vehicle depending on the device settings and options.
1. Enter diagnostic mode (see DTC CHECK / CLEAR ).
2. Select "Display Check" from the "Diagnosis MENU" screen.
  
  Fig 1: Diagnosis Menu Screen Display - Display Check
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Select "Color Bar Check" from the "Display Check" screen.
  
  Fig 2: Display Check Screen - Color Bar Check
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Select color bar from the "Color Bar Check Mode" screen,
  HINT:
  - The entire screen turns to the color or stripe selected.
  - Touching the display will return to the "Color Bar Check" screen.
HOW TO PERFORM TOUCH SWITCH CHECK
HINT:
- This mode checks the touch switch operation condition of the multi-display.
- Illustrations may differ from the actual vehicle depending on the device settings and options.
1. Enter diagnostic mode (see DTC CHECK / CLEAR ).
  
  Fig 3: Display Check Mode (Color Bar Check Mode) Screen
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Select "Display Check" from the "Diagnosis MENU" screen.
  
  Fig 4: Display Diagnosis MENU Screen - Display Check
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Select "Touch Switch Check" from the "Display Check" screen.
  
  Fig 5: Display Check Screen - Touch Switch Check
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Touch the display anywhere in the open area to perform the check when the "Touch Switch Check" screen is displayed.
  HINT:
  - A "+" mark is displayed where the display is touched.
  - The "+" mark remains on the display even after the finger is removed.
    
    Fig 6: Display Touch Switch Check Screen
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
HOW TO PERFORM VEHICLE SIGNAL CHECK
HINT:
- This mode checks the input of vehicle signals to the multi-display.
- Illustrations may differ from the actual vehicle depending on the device settings and options.
1. Enter diagnostic mode (see DTC CHECK / CLEAR ).
2. Select "Display Check" from the "Diagnosis MENU" screen.
  
  Fig 7: Display Diagnosis MENU Screen - Display Check
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Select "Vehicle Signal Check" from the "Display Check" screen.
4. When the "Vehicle Signal Check Mode" screen is displayed, check all the vehicle signal conditions.
  HINT:
  - Only conditions having inputs are displayed.
  - This screen is updated once per second when input signals to the vehicle are changed.
    
    Fig 8: Display Check Screen - Vehicle Signal Check
    Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002