Cruise Control Main Switch: Installation

INSTALL CRUISE CONTROL MAIN SWITCH ASSEMBLY
1. Install the switch and steering wheel boss cover lower.
2. Install the 3 screws.
  
  Fig 1: Locating Switch And Steering Wheel Boss Cover Lower Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 3 screws.
INSTALL STEERING WHEEL ASSEMBLY (See INSTALLATION )
INSTALL STEERING PAD ASSEMBLY (See DISPOSAL )

Fig 2: Locating Steering Wheel Assembly
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL STEERING PAD SWITCH MODULATOR
1. Install the modulator and then connect the connector.
2. Install the 2 screws.
  
  Fig 3: Locating Steering Pad Switch Modulator Screws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL SWITCH AND VOLUME CASE
1. Attach the 3 claws to install the case.
INSTALL NO. 2 STEERING WHEEL COVER LOWER
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
PERFORM INITIALIZATION
1. Perform initialization (see INITIALIZATION ).
  NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
CHECK SRS WARNING LIGHT
1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
  
  Fig 4: Applying Protective Tape
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002