LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> SC 430 >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System >> Road Test
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Road Test

  1. INSPECT "SET" FUNCTION 
    1. Push the ON-OFF button ON.
    2. Drive at the required speed between 40 km/h (25 mph) and 200 km/h (125 mph).
    3. Push the cruise control main switch to -/SET.
    4. After releasing the lever, check that the vehicle cruises at the set speed.
      Fig 1: Inspecting "SET" Function
      G05292528Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSPECT ACCELERATION FUNCTION 
    1. Push the ON-OFF button ON.
    2. Drive at the required speed between 40 km/h (25 mph) and 200 km/h (125 mph).
    3. Push the cruise control main switch to -/SET.
    4. Check that vehicle speed increases while the cruise control main switch is set to +/RES.
    5. Check that the vehicle cruises at the newly set speed when the cruise control main switch is released.
    6. Momentarily (approximately 0.6 seconds) tap up the cruise control main switch to +/RES and then release it. Check that vehicle speed increases approximately 1.6 km/h (1 mph) with each cruise control main switch operation (tap-up control).
      Fig 2: Inspecting Acceleration Function
      G05292529Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSPECT COAST FUNCTION 
    1. Push the ON-OFF button ON.
    2. Drive at the required speed between 40 km/h (25 mph) and 200 km/h (125 mph).
    3. Push the cruise control main switch to -/SET.
    4. Check that vehicle speed decreases while the cruise control main switch is set to -/SET.
    5. Check that the vehicle cruises at the newly set speed when the cruise control main switch is released.
    6. Momentarily (approximately 0.6 seconds) push the cruise control main switch to -/SET and then release it. Check that vehicle speed decreases approximately 1.6 km/h (1 mph) with each cruise control main switch operation (tap-down control).

      HINT:

      The cruise control system automatically cancels when the vehicle speed decreases below 40 km/h (25 mph).

      Fig 3: Inspecting Coast Function
      G05292530Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSPECT CANCEL FUNCTION 
    1. Push the ON-OFF button ON.
    2. Drive at the required speed between 40 km/h (25 mph) and 200 km/h (125 mph).
    3. Push the cruise control main switch to -/SET.
    4. Check that the cruise control system is canceled when performing one of the following.
      • Depressing the brake pedal
      • Shifting into any position other than D, or during sequential shift mode; the shift lever is moved from S (4) to "- "(3, 2, 1).
      • Pushing the ON-OFF button OFF
      • Pulling the cruise control main switch to CANCEL
        Fig 4: Inspecting Cancel Function
        G05292531Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. INSPECT RESUME FUNCTION 
    1. Push the ON-OFF button ON.
    2. Drive at the required speed between 40 km/h (25 mph) and 200 km/h (125 mph).
    3. Push the cruise control main switch to -/SET.
    4. Check that the cruise control system is canceled when performing one of the following.
      • Depressing the brake pedal
      • Shifting into any position other than D, or during sequential shift mode; the shift lever is moved from S (4) to "-" (3, 2, 1).
      • Pulling the cruise control main switch to CANCEL
    5. Set the cruise control main switch to +/RES, and check that the vehicle resumes the previously set speed.

      HINT:

      RESUME function does not resume the set speed when the vehicle speed decreases below 40 km/h (25 mph).

      Fig 5: Inspecting Resume Function
      G05292532Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals