Inspection Procedure

1. If the disc is dirty, clean the disc by wiping the CD's underside radially with a soft cloth.
   Fig 1: Cleaning CD

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK: 

   Malfunction disappears. 

   NOTE: Do not use a conventional record cleaner or antistatic preservative.

OK: CD WAS DIRTY 

NG: Go to next step 

1. Replace the CD with a normal one and check if the same problem occurs again.

   OK: 

   Malfunction disappears. 

NG: CD IS FAULTY 

OK: Go to next step 

1. Check the location in which the CD skipping occurs.

   Result: 

   RESULT CHART
   
   

   Result	Proceed to
   Location's driving surface is bumpy or rough	A
   Location's driving surface is normal	B

B: Go to step  5

A: Go to next step 

1. Check the installation condition of the radio receiver.

   OK: 

   Installed properly. 

NG: INSTALL RADIO RECEIVER ASSEMBLY PROPERLY 

OK: Go to next step 

1. Remove the radio receiver and install it in a same model vehicle. Check if the CD sound skips.

   OK: 

   CD sound does not skip. 

NG: MALFUNCTIONS MAY NOT BE PRESENT 

OK: Go to next step 

1. Check whether or not a rapid temperature change occurred in the cabin.

   OK: 

   Rapid temperature change occurred. 

   HINT:

   A rapid temperature change creates condensation inside the CD player, which may disable CD playback.

NG: REPLACE RADIO RECEIVER ASSEMBLY 

OK: CONDENSATION DUE TO TEMPERATURE CHANGE (LET IT SIT FOR A WHILE BEFORE USING)