LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> SC 430 >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio/Visual >> Network Gateway Ecu >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Network Gateway Ecu: Installation

  1. INSTALL NETWORK GATEWAY ECU 
    1. Install the ECU with the 2 screws.
      Fig 1: Locating ECU And Screws
      G05293164Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL INSTRUMENT PANEL REINFORCEMENT (See  INSTALLATION  ) 
  3. INSTALL NO. 2 HEATER TO REGISTER DUCT (See  INSTALLATION  ) 
  4. INSTALL NO. 3 HEATER TO REGISTER DUCT (See  INSTALLATION  ) 
  5. INSTALL NO. 1 HEATER TO REGISTER DUCT (See  INSTALLATION  ) 
  6. INSTALL FRONT DEFROSTER NOZZLE (See  INSTALLATION  ) 
  7. INSTALL NO. 2 SIDE DEFROSTER NOZZLE DUCT (See  REMOVAL  ) 
  8. INSTALL NO. 1 SIDE DEFROSTER NOZZLE DUCT (See  INSTALLATION  ) 
  9. INSTALL NO. 1 INSTRUMENT PANEL PIN (See  INSTALLATION  ) 
  10. INSTALL STEERING COLUMN ASSEMBLY (See  INSTALLATION  ) 
  11. INSTALL INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 
    1. Install the instrument panel safety pad (see INSTALLATION ).
  12. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  13. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
scientia non olet · About LEMON Manuals