LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2007 >> SC 430 >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Audio/Visual >> Network Gateway Ecu >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Network Gateway Ecu: Removal

  1. TABLE OF BOLT, SCREW AND NUT (See  REMOVAL  ) 
  2. SET RADIO RECEIVER ASSEMBLY TO SHIPMENT MODE (See  REMOVAL   ) 
  3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
  4. INSPECT CENTER FRONT WHEEL 
  5. REMOVE INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY 
    1. Remove the instrument panel safety pad (see REMOVAL ).
  6. REMOVE STEERING COLUMN ASSEMBLY (See  DISASSEMBLY  ) 
  7. REMOVE NO. 1 INSTRUMENT PANEL PIN (See  DISASSEMBLY  ) 
  8. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT (See  DISASSEMBLY  ) 
  9. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT (See  DISASSEMBLY  ) 
  10. REMOVE FRONT DEFROSTER NOZZLE (See  DISASSEMBLY  ) 
  11. REMOVE NO. 1 HEATER TO REGISTER DUCT (See  REASSEMBLY  ) 
  12. REMOVE NO. 3 HEATER TO REGISTER DUCT (See  REASSEMBLY  ) 
  13. REMOVE NO. 2 HEATER TO REGISTER DUCT (See  REASSEMBLY  ) 
  14. REMOVE INSTRUMENT PANEL REINFORCEMENT (See  REASSEMBLY  ) 
  15. REMOVE NETWORK GATEWAY ECU 
    1. Remove the 2 screws and ECU.
      Fig 1: Locating ECU And Screws
      G05293163Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals