Inspection Procedure
- CHECK MULTI-DISPLAY SWITCH
- Check for foreign matter around the switch that might prevent operation.
OK:
No foreign matter is found.
NG: REMOVE ANY FOREIGN MATTER FOUND
OK: Go to next step
- Check for foreign matter around the switch that might prevent operation.
- CHECK OPERATION OF MULTI-DISPLAY SWITCH
- After replacing the multi-display switch with a normally one, check that the panel switch operates.
OK:
Panel switch operation returns to normal.
NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE
OK: END
- After replacing the multi-display switch with a normally one, check that the panel switch operates.