Inspection Procedure

1. Enter the menu screen by pressing the "MENU" switch.
2. Select "Volume".
   Fig 1: Diagnostic Tool Display - Volume

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Check that "OFF" is not selected.
   Fig 2: Diagnostic Tool Display - OFF

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK: 

   OFF is not selected. 

NG: TURN VOICE GUIDANCE VOLUME UP TO 4 USING VOICE ADJUSTMENT SWITCHES 

OK: Go to next step 

1. Enter the menu screen by pressing the "MENU" switch.
2. Select "Setup".
   Fig 3: Diagnostic Tool Display - SET UP

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Check that "Auto Voice Guidance" is not off.

   OK: 

   Auto voice guidance is not off. 

4. Check that "Voice Guidance in All Modes" is on.
   Fig 4: Diagnostic Tool Display - Voice Guidance In All Modes

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK: 

   Voice guidance in all modes is on. 

NG: TURN AUTO VOICE GUIDANCE "ON" 

OK: Go to next step 

1. Check that the map disc is not deformed or cracked.
   Fig 5: Checking CD For Deformed Or Cracked

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   OK: 

   No deformations or cracks on map disc. 

NG: REPLACE MAP DISC 

OK: Go to next step 

1. Check that audio sound can be heard from the driver side speaker.

   OK: 

   Audio sound can be heard. 

NG: PROCEED TO NEXT CIRCUIT INSPECTION SHOWN IN PROBLEM SYMPTOMS TABLE 

OK: REPLACE NAVIGATION ECU