Transmitter Battery: Installation
- INSTALL TRANSMITTER BATTERY
- Install the battery (lithium battery) with the positive (+) side up, as shown in the illustration.NOTE:
- Be sure that the positive side and the negative side of the transmitter battery are matched up correctly.
- Be careful not to bend the transmitter battery electrode during insertion.
- Keep the transmitter case interior free of dust and oil.
- Using a screwdriver, install the cover with the 2 screws.NOTE: If the screws are loose, it may cause faulty contact between the battery (lithium battery) and the terminals.
- Install the battery (lithium battery) with the positive (+) side up, as shown in the illustration.
- INSTALL DOOR CONTROL TRANSMITTER ASSEMBLY
- INSTALL TRANSMITTER HOUSING COVER