Outer Rear View Mirror: Installation
- INSTALL OUTER MIRROR COVER LH
- Install the mirror cover as shown in the illustration.
- Install the protect cover LH.
- Install the visor rim and attach the claw.
- Install the 4 screws.
- After installing the outer mirror cover, check that there is no gap between the cover and mirror visor rim.
HINT:
If there is a gap between the cover and visor rim, noises may occur during driving.
- INSTALL OUTER REAR VIEW MIRROR SUB-ASSEMBLY LH
- Connect the black connector to the terminal with the "B" engraving next to it.
- Connect the white connector to the terminal with the "W" engraving next to it.
- Install the mirror as shown in the illustration.
- INSTALL OUTER REAR VIEW MIRROR ASSEMBLY LH
- Install the mirror with the 3 bolts.
Torque: 5.5 N*m (56 kgf*cm, 49 in.*lbf)
- Install the clamp.
- Connect the connector.
- Install the mirror with the 3 bolts.
- INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH (See REASSEMBLY )
- INSTALL FRONT DOOR WINDOW UPPER BRACKET GARNISH LH (See REASSEMBLY )
- INSTALL NO. 2 DOOR INSIDE HANDLE BEZEL LH (See REASSEMBLY )
- INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (See REASSEMBLY )