Data List / Active Test
- READ DATA LIST
HINT:
Using the intelligent tester's DATA LIST allows switch, sensor, actuator and other item values to be read without removing any parts. Reading the DATA LIST early in troubleshooting is one way to save time.
- Connect the intelligent tester to the DLC3.
- Turn the ignition switch ON.
- Read the DATA LIST.
Position control ECU (for driver, front passenger side);
DATA LISTItem Measurement Item/ Range (Display) Normal Condition Diagnostic Note RECLIN SW REAR Reclining switch signal (Rearward)/ON or OFF ON: Reclining switch (Rearward) is ON
OFF: Reclining switch (Rearward) is OFF- RECLIN SW FRONT Reclining switch signal (Forward)/ON or OFF ON: Reclining switch (Forward) is ON
OFF: Reclining switch (Forward) is OFF- F VTCL SW DOWN Front vertical switch signal (Downward)/ON or OFF ON: Front vertical switch (Downward) is ON
OFF: Front vertical switch (Downward) is OFF- F VTCL SW UP Front vertical switch signal (Upward)/ON or OFF ON: Front vertical switch (Upward) is ON
OFF: Front vertical switch (Upward) is OFF- LIFTER SW DOWN Lifter switch signal (Downward)/ON or OFF ON: Lifter switch (Downward) is ON
OFF: Lifter switch (Downward) is OFF- LIFTER SW UP Lifter switch signal (Upward)/ON or OFF ON: Lifter switch (Upward) is ON
OFF: Lifter switch (Upward) is OFF- SLIDE SW REAR Sliding switch signal (Rearward)/ ON or OFF ON: Sliding switch (Rearward) is ON
OFF: Sliding switch (Rearward) is OFF- SLIDE SW FRONT Sliding switch signal (Forward)/ ON or OFF ON: Sliding switch (Forward) is ON
OFF: Sliding switch (Forward) is OFF- POWER VOLTAGE Power supply for driver seat ECU & switch/ MIN: 0 V, MAX: 19.89 V Within range from 11 to 14 V - MOTOR STATUS Motor status signal/ STANDBY, MOVING or LOCK STANDBY: Motor is idle
MOVING: Motor is moving
LOCK: Motor is locked- VEHICLE SPD Vehicle speed/ MIN: 0 km/h MAX: 255 km/h Actual vehicle speed - IGSW Ignition switch status/ ON or OFF ON: Ignition switch is ON
OFF: Ignition switch is OFF- KEY UNLOCK SW Key unlock warning switch signal/ ON or OFF ON: Key is in ignition key cylinder
OFF: Key is not in ignition key cylinder- D-DOOR WARN SW Door courtesy switch signal/ ON or OFF ON; Driver side door is open
OFF: Driver side door is closed- PNPSW Shift lever position P signal/ ON or OFF ON: Shift lever in P position
OFF: Shift lever in any position except P- N SW Shift lever position N signal/ ON or OFF ON: Shift lever in N position
OFF: Shift lever in any position except N- M2SW Seat memory switch M2 signal/ ON or OFF ON: Seat memory switch M2 is ON
OFF: Seat memory switch M2 is OFF- M1 SW Seat memory switch M1 signal/ ON or OFF ON: Seat memory switch M1 is ON
OFF: Seat memory switch M1 is OFF- SETSW Seat memory set switch signal/ ON or OFF ON: Memory set switch is ON
OFF: Memory set switch is OFF- SLIDE POS INI Slide position initial flag signal/ ON or OFF ON: Slide position initial flag is ON
OFF: Slide position initial flag is OFF- RECLIN POS INI Reclining position initial flag signal/ ON or OFF ON: Reclining position initial flag is ON
OFF: Reclining position initial flag is OFF- SLIDE POS Seat sliding position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - RECLIN POS Seatback position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - F VTCL POS Seat front vertical position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - LIFTER POS Seat lifter position/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - MEM M1 SW Driving position memorized with seat memory switch M1/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- MEM M2 SW Driving position memorized with seat memory switch M2/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- SEAT MEM M1 Seat position memorized with seat memory switch M1/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- SEAT MEM M2 Seat position memorized with seat memory switch M2/ MEM or NOT MEM MEM: Memorized
NOT MEM: Not memorized- SLIDE MEM POS 1 Seat sliding position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - RECLN MEM POS 1 Seatback position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - F VTCL MEM POS 1 Front vertical position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - LIFTER MEM POS 1 Lifter position memorized with seat memory switch M1/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - SLIDE MEM POS 2 Seat sliding position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - RECLN MEM POS 2 Seatback position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - F VTCL MEM POS 2 Front vertical position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 - LIFTER MEM POS 2 Lifter position memorized with seat memory switch M2/ MIN: -4096, MAX: 4096 Within range from -4096 to 4096 -
- PERFORM ACTIVE TEST
HINT:
Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time.
The DATA LIST can be displayed during the ACTIVE TEST.
- Connect the intelligent tester to the DLC3.
- Turn the ignition switch ON.
- Perform the ACTIVE TEST.
Position control ECU (for driver, front passenger side):
ACTIVE TEST LISTItem Test Details Diagnostic Note RECLINING Seat reclining operation FRONT / REAR - F VERTICAL Seat front vertical operation UP / DOWN - LIFTER Seat lifter operation UP / DOWN - SLIDE Seat sliding operation FRONT / REAR -