Front Seat Assembly: Removal
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
CAUTION:
Wear protective gloves. Sharp areas on the seatback spring, seat adjuster and seat cushion spring may injure your hands.
- DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.
- REMOVE FRONT SEAT ASSEMBLY
- Using a screwdriver, pry out the 4 seat track bracket covers.
HINT:
Tape the screwdriver tip before use.
- Remove the 4 bolts.
- Disconnect the connectors under the seat. Then remove the seat.NOTE: Be careful not to damage the vehicle body.
- Using a screwdriver, pry out the 4 seat track bracket covers.