Oil Pump: Reassembly

INSTALL OIL PUMP GEAR SET
1. Place the drive and driven rotors into the pump body with the marks facing the pump body cover side.
  
  Fig 1: Inspecting Oil Pump Rotor Set
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the pump body cover with the 10 screws.
  Torque: 10 N*m (105 kgf*cm, 8 ft.*lbf)
  
  Fig 2: Installing Pump Body Cover
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL OIL PUMP RELIEF VALVE
1. Insert the relief valve and compression spring into the oil pump body hole.
2. Install the plug.
  Torque: 49 N*m (500 kgf*cm, 36 ft.*lbf)
  
  Fig 3: Installing Relief Valve
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002