Dismounting/Mounting Procedures: Notes
CAUTION:
The tire should be dismounted from the wheel using the tire changer manufacturer's instructions. Use the following information to avoid damage during the dismounting/mounting procedures.
NOTE:
When a tire pressure sensor and/or tire pressure monitor ECU are replaced, the sensor ID must be memorized by the tire pressure monitor ECU. See RESET PROCEDURES .
NOTE:
If vehicle will regularly be driven at sustained high speeds above 112 mph (180 km/h), add 12 psi (80 kPa) to all tires, but never exceed the maximum cold tire inflation pressure-molded on the tire sidewall.