Data List / Active Test

HINT:

Performing the intelligent tester's ACTIVE TEST allows relay, VSV, actuator, and other items to be operated without removing any parts. Performing the ACTIVE TEST early in troubleshooting is one way to save time.

The DATA LIST can be displayed during the ACTIVE TEST.

1. Connect the intelligent tester (with CAN VIM) to the DLC3.
2. Turn the ignition switch ON.
3. Perform the ACTIVE TEST according to the tester's display.

   Skid control ECU 

   DATA LIST REFERENCE
   
   

   Item	Test Details	Diagnostic Note
   PPS solenoid	Power steering solenoid valve ON / OFF	-