Transmission Wire: Inspection

INSPECT TRANSMISSION WIRE

Measure the resistance of the transmission wire.

Standard resistance

TESTER CONNECTION SPECIFIED CONDITION

Tester Connection	Specified Condition
1 (OT-) - 9 (OT+)	79 to 156 kΩ
1 (OT-) - Body ground	1 MΩ or higher
9 (OT+) - Body ground	1 MΩ or higher

Fig 1: Identifying OT Transmission Wire Connector Terminals

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

HINT:

If the resistance is not within the specified range of either of the ATF temperatures shown in the table below, the driveability of the vehicle may decrease.

Standard resistance

ATF TEMPERATURE SPECIFIED CONDITION

ATF Temperature	Specified Condition
20°C (68°F)	3 to 4 kΩ
11 OX (230°F)	0.22 to 0.28 kΩ