LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Lighting) >> Light Failure Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Light Failure Sensor: Installation

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL LIGHT FAILURE SENSOR 
    1. Engage the clamp and install the light failure sensor.
    2. Connect the connector.
      Fig 1: Locating Light Failure Sensor Connector
      G05252547Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LUGGAGE COMPARTMENT INNER TRIM COVER LH  (See REASSEMBLY )
  3. INSTALL REAR FLOOR FINISH PLATE  (See REASSEMBLY )
  4. INSTALL NO. 1 LUGGAGE COMPARTMENT TRIM HOOK  (See REASSEMBLY )
  5. INSTALL LUGGAGE HOLD BELT STRIKER ASSEMBLY  (See REASSEMBLY )
  6. INSTALL SPARE WHEEL COVER TRAY 
  7. INSTALL SPARE WHEEL COVER 
  8. INSTALL LUGGAGE COMPARTMENT FLOOR MAT 
scientia non olet · About LEMON Manuals