Front Axle Hub Bolt: Replacement

WARNING: This page is about a different car, the 2007 Lexus ES 350. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT WHEEL
SEPARATE FRONT DISC BRAKE CALIPER ASSEMBLY (See REMOVAL )
REMOVE FRONT DISC (See INSPECTION )
REMOVE FRONT AXLE HUB BOLT
1. Temporarily install the 2 nuts and washers to the front axle hub bolt as shown in the illustration.
2. Using SST and a brass bar or a similar tool to hold the front axle, remove the front axle hub bolt. SST 09628-10011
  
  Fig 1: Removing Nuts And Washers To Front Axle Hub Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT AXLE HUB BOLT
1. Install a washer and nut to a new front axle hub bolt as shown in the illustration.
2. Using a brass bar or a similar tool to hold the front axle, install the hub bolt by torquing the nut.
INSTALL FRONT DISC (See REASSEMBLY )
INSTALL FRONT DISC BRAKE CALIPER ASSEMBLY (See INSTALLATION )

Fig 2: Installing Washer And Nut To Front Axle Hub Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT WHEEL
Torque: 103 N*m (1,050 kgf*cm, 76 ft.*lbf)