LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> ES 350 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt >> Rear Seat Inner Belt Assembly >> Removal
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Rear Seat Inner Belt Assembly: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL (w/ Rear Seat Side Airbag) 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (See AIRBAG SYSTEM ).
  2. REMOVE REAR SEAT CUSHION ASSEMBLY  (See REMOVAL )
  3. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH 
    1. Remove the bolt and the rear seat inner with center belt assembly LH.
    Fig 1: Identifying Rear Seat Inner With Center Belt Assembly LH Bolt
    G05252012Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE REAR SEAT HEADREST ASSEMBLY 
  5. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY 
  6. REMOVE REAR SEATBACK ASSEMBLY  (See REMOVAL )
  7. REMOVE REAR DOOR SCUFF PLATE LH  (See REMOVAL )
  8. REMOVE REAR DOOR SCUFF PLATE RH  (See REMOVAL )
  9. REMOVE REAR SEAT SIDE GARNISH LH (w/o Rear Seat Side Airbag)  (See REMOVAL )
  10. REMOVE REAR SEAT SIDE GARNISH RH (w/o Rear Seat Side Airbag)  (See REMOVAL )
  11. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY LH (w/ Rear Seat Side Airbag)  (See REMOVAL )
  12. REMOVE REAR SEAT SIDE AIRBAG ASSEMBLY RH (w/ Rear Seat Side Airbag) 

    HINT:

    Use the same procedure for the RH side and the LH side.

  13. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY LH  (See REMOVAL )
  14. REMOVE ROOF SIDE INNER GARNISH ASSEMBLY RH  (See REMOVAL )
  15. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY LH 
    1. Remove the bolt and disconnect the floor end of the rear seat 3 point type belt assembly LH.
    Fig 2: Identifying Rear Seat 3 Point Type Belt Assembly LH Bolt
    G05252013Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. DISCONNECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY RH 

    HINT:

    Use the same procedure for the RH side and the LH side.

  17. DISCONNECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH 
    1. Remove the bolt and disconnect the floor end of the rear seat inner with center belt assembly RH.
      Fig 3: Identifying Rear Seat Inner With Center Belt Assembly RH Bolt
      G05252014Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  18. REMOVE REAR SEAT SHOULDER BELT HOLE COVER 
    1. Disengage the 4 claws and remove the rear seat shoulder belt hole cover.

      HINT:

      Use the same procedure for the other 2 rear seat shoulder belt hole covers.

    Fig 4: Identifying Rear Seat Shoulder Belt Hole Cover With Claws
    G05252015Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  19. REMOVE CENTER STOP LIGHT SET (w/o Rear Sunshade)  (See REMOVAL )
  20. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/o Rear Sunshade) 
    1. Disengage the 2 clips.
    2. Pass the 3 rear seat belt floor anchors through the package tray trim panel assembly.
    3. Disengage the 6 claws and remove the package tray trim panel assembly.
    Fig 5: Identifying Package Tray Trim Panel Assembly With Clips And Claws
    G05252016Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  21. REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY (w/ Rear Sunshade)  (See REMOVAL )
  22. REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH 
    1. Remove the bolt and the rear seat inner with center belt assembly RH.
      Fig 6: Identifying Rear Seat Inner With Center Belt Assembly RH Bolt
      G05252017Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals