DTC Check/Clear
- CHECK FOR DTCs
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Read the DTCs. Enter the following menus: Chassis / EMPS / Trouble Codes.
- CLEAR DTCs
- Connect the Techstream to the DLC3.
- Turn the engine switch on (IG).
- Turn the Techstream on.
- Clear the DTCs. Enter the following menus: Chassis / EMPS / Trouble Codes.
- According to the display on the Techstream, select the trouble code data display with clear button.