Inspection Procedure

1. Check that the outer rear view mirror LH and RH can be moved using the mirror master switch of the integration control and panel.

   OK: Outer rear view mirror LH and RH can be moved using mirror master switch of integration control and panel. 

NG:  Go to PROBLEM SYMPTOMS TABLE 

OK: Go to Next Step 

1. Check that the shift indicator of the combination meter operates normally (See ON-VEHICLE INSPECTION ).

   OK: Shift indicator of combination meter operates normally. 

NG: Go to METER / GAUGE SYSTEM  (See INITIALIZATION )

OK: Go to Next Step 

1. Check if the malfunction disappears when a normally functioning front multiplex network door ECU is installed.

   Result: 

   RESULT CHART
   
   

   Result	Proceed to
   Outer rear view mirror LH does not operate normally	A
   Outer rear view mirror RH does not operate normally	B
   Outer rear view mirror LH operates normally	C
   Outer rear view mirror RH operates normally	D

B: REPLACE OUTER REAR VIEW MIRROR ASSEMBLY RH  (See REMOVAL  )

C: REPLACE FRONT MULTIPLEX NETWORK DOOR ECU LH 

D: REPLACE FRONT MULTIPLEX NETWORK DOOR ECU RH 

A: REPLACE OUTER REAR VIEW MIRROR ASSEMBLY LH