Inspection Procedure
- CHECK INTEGRATION CONTROL AND PANEL ASSEMBLY FUNCTION (MIRROR MASTER SWITCH FUNCTION)
- Check that the outer rear view mirror assembly LH and RH can be moved using the mirror master switch of the integration control and panel assembly.
OK: Outer rear view mirror assembly LH and RH can be moved using mirror master switch of integration control and panel assembly.
NG : GO TO PROBLEM SYMPTOMS TABLE
OK : Go to Next Step
- Check that the outer rear view mirror assembly LH and RH can be moved using the mirror master switch of the integration control and panel assembly.
- CHECK OPERATION OF SHIFT INDICATOR
- Check that the shift indicator of the combination meter operates normally.
OK: Shift indicator of combination meter operates normally.
NG : GO TO COMBINATION METER
OK : Go to Next Step
- Check that the shift indicator of the combination meter operates normally.
- CHECK FRONT MULTIPLEX NETWORK DOOR ECU
- Check if the malfunction disappears when a normally functioning front multiplex network door ECU.
Result
RESULT CHARTResult Proceed to Outer rear view mirror LH does not operate normally A Outer rear view mirror RH does not operate normally B Outer rear view mirror LH operates normally C Outer rear view mirror RH operates normally D
B : REPLACE OUTER REAR VIEW MIRROR ASSEMBLY RH
C : REPLACE FRONT MULTIPLEX NETWORK DOOR ECU LH
D : REPLACE FRONT MULTIPLEX NETWORK DOOR ECU RH
A : REPLACE OUTER REAR VIEW MIRROR ASSEMBLY LH
- Check if the malfunction disappears when a normally functioning front multiplex network door ECU.