Problem Symptoms Table
HINT:
CAUTION is displayed on the multi-display and the rear view monitor system cannot be used if the back door is open with the shift lever in the R position.
REAR VIEW MONITOR SYSTEM
PROBLEM SYMPTOMS TABLE
| Symptom | Suspected Area | Information |
|---|---|---|
| When shift lever is in R position, rear view monitor image is not displayed (Screen is not black). | Power source circuit | TELEVISION CAMERA ECU POWER SOURCE CIRCUIT |
| Reverse signal circuit | REVERSE SIGNAL CIRCUIT | |
| AVC-LAN circuit | AVC-LAN CIRCUIT | |
| Television camera ECU | REMOVAL | |
| When shift lever is in R position, rear view monitor image is not displayed (Screen is black). | Display signal circuit between television camera assembly and television camera ECU | DISPLAY SIGNAL CIRCUIT BETWEEN TELEVISION CAMERA ECU AND TELEVISION CAMERA ASSEMBLY |
| Replace GVIF cable between television camera ECU and multi-display | - | |
| Television camera ECU | REMOVAL | |
| Television camera | REMOVAL | |
| When shift lever is not in R position, rear view monitor image is displayed. | Reverse signal circuit | REVERSE SIGNAL CIRCUIT |
| Television camera ECU | REMOVAL | |
| The back monitor image is displayed even when the back door is open. | Back door courtesy switch circuit | BACK DOOR COURTESY SWITCH CIRCUIT |
| Television camera ECU | REMOVAL | |
| Problem with the rear view monitor image (color, disorder of picture). | Display signal circuit between television camera assembly and television camera ECU | DISPLAY SIGNAL CIRCUIT BETWEEN TELEVISION CAMERA ECU AND TELEVISION CAMERA ASSEMBLY |
| Replace GVIF cable between television camera ECU and multi-display | - | |
| Television camera ECU | REMOVAL | |
| Television camera | REMOVAL |