Throttle Body: Installation

INSTALL THROTTLE BODY
1. Install a new gasket to the intake air surge tank.
  HINT:
  
  Align the protrusion of the gasket on the intake air surge tank.
  
  Fig 1: Aligning Protrusion Of Gasket On Intake Air Surge Tank
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Connect the 2 water by-pass hoses to the throttle body.
  
  Fig 2: Locating Throttle Body Bolts And Water By-Pass Hoses
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the throttle body with the 4 bolts.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
4. Connect the throttle motor connector.
Fig 3: Locating Hose Clamp And Air Cleaner Cap With Air Cleaner Hose
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL AIR CLEANER CAP WITH AIR CLEANER HOSE
1. Install the air cleaner cap with air cleaner hose assembly with the 4 clamps and hose clamp.
  HINT:
  
  Be sure to install the air cleaner assembly so that the screw part of the hose clamp is as shown in the illustration.
  
  Fig 4: Locating Air Cleaner Hose Assembly With Clamps
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the VSV hose to the air cleaner hose.
  
  Fig 5: Locating VSV Hose To Air Cleaner Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Connect the MAF meter connector and clamp to the air cleaner.
Fig 6: Locating MAF Meter Connector And Clamp From Air Cleaner
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT NO. 2 VENTILATION HOSE
1. Connect the ventilation hose to the cylinder head cover with the clamp.
ADD ENGINE COOLANT (See ON-VEHICLE INSPECTION )
INSPECT FOR COOLANT LEAK (See ON-VEHICLE INSPECTION )
INSTALL ENGINE UNDER COVER
CHECK FUNCTION OF THROTTLE BODY (See ON-VEHICLE INSPECTION )
INSTALL V-BANK COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL ENGINE ROOM SIDE COVER RH
INSTALL COOL AIR INTAKE DUCT SEAL (See INSTALLATION )