PCV Valve: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL VENTILATION VALVE SUB-ASSEMBLY
1. Install the ventilation valve sub-assembly.
Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)

HINT:

When reusing the ventilation valve sub-assembly, inspect the O-ring If the O-ring has scratches or cuts, replace the ventilation valve sub-assembly

Fig 1: Inspecting O-Ring
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VENTILATION HOSE
1. Install the ventilation hose to the ventilation valve sub-assembly.
Fig 2: Locating Ventilation Hose
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (See INSTALLATION )
INSTALL INTAKE AIR SURGE TANK ASSEMBLY
(See INSTALLATION )