LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (Automatic Transaxle) >> Speed Sensor >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Speed Sensor: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL SPEED SENSOR SP2 
    1. Install the speed sensor to the transmission case with the bolt.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    2. Connect the sensor connector.
      Fig 1: Locating Speed Sensor SP2 With Bolt
      G04948416Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL SPEED SENSOR NC3 
    1. Install the speed sensor to the transmission case with the bolt.

      Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf) 

    2. Connect the sensor connector.
      Fig 2: Locating Speed Sensor NC3 With Bolt
      G04948415Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. INSTALL SPEED SENSOR NT 
    1. Coat a new O-ring with ATF and install it to the speed sensor
    2. Using a T30 "TORX" wench, install the speed sensor with the bolt.

      Torque: 6.8 N*m (69 kgf*cm, 60 in.*lbf) 

    3. Connect the sensor connector.
      4. Fig 3: Locating Speed Sensor NT With Bolt
      G04948414Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. INSTALL TRANSMISSION VALVE BODY ASSEMBLY  (See INSTALLATION  )
  5. INSTALL VALVE BODY OIL STRAINER ASSEMBLY  (See INSTALLATION  )
  6. INSTALL AUTOMATIC TRANSMISSION OIL PAN SUB-ASSEMBLY  (See INSTALLATION  )
  7. INSTALL NO. 1 EXHAUST PIPE SUPPORT BRACKET SUB-ASSEMBLY  (See INSTALLATION  )
  8. ADD AUTOMATIC TRANSMISSION FLUID 
    1. Add automatic transmission fluid (See AUTOMATIC TRANSMISSION FLUID  ).
  9. INSTALL NO. 2 ENGINE UNDER COVER 
scientia non olet · About LEMON Manuals