LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> IS 250 AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Theft Deterrent / Keyless Entry) >> SMART ACCESS SYSTEM WITH PUSH-BUTTON START (for Start Function) >> Problem Symptoms Table
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Problem Symptoms Table

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

HINT

Use the table below to help determine the cause of problem symptoms If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table Check each symptom by checking the suspected areas in the order they are listed Replace parts as necessary

Smart Access System with Push-button Start 

NORMAL CONDITION CHART

Symptom Suspected Area See
Power Source Mode does not Change AM2 Fuse POWER SOURCE MODE DOES NOT CHANGE 
Engine Switch -
Main Body ECU RH (Cowl Side Junction Block RH) -
Main Body ECU LH (Cowl Side Junction Block LH) -
IG2 Relay -
Wire Harness or Connector -
Power Source Control ECU -
Engine does not Start Power Source Control ECU ENGINE DOES NOT START 
Certification ECU (Smart Key ECU Assembly) -
Shift Lock Control ECU -
ID Code Box (Immobilizer Code ECU) -
Stop Light Switch -
Electrical Steering Lock Function -
SFI System -
Engine Immobilizer System -
Wire Harness or Connector -
Engine Switch Indicator Light does not Come On Engine switch indicator light circuit ENGINE SWITCH INDICATOR CIRCUIT