DTC Check / Clear

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

HINT.

Use the Techstream to read and clear the DTCs of the occupant classification ECU, otherwise the DTCs cannot be read and cleared

DTC CHECK
1. Turn the engine switch off.
2. Connect the Techstream to the DLC3
3. Turn the engine switch on (IG) and turn the Techstream on
4. Enter the following menus' Body Electrical / Occupant Detection / Trouble Code
5. Check the DTCs by following the prompts on the Techstream screen
  HINT
  
  Refer to the Techstream operator's service information for further details
DTC CLEAR
1. Turn the engine switch off
2. Connect the Techstream to the DLC3
3. Turn the engine switch on (IG) and turn the Techstream on
4. Enter the following menus Body Electrical / Occupant Detection / Trouble Code.
5. Clear the DTCs by following the prompts on the Techstream screen
  HINT
  
  Refer to the Techstream operator's service information for further details