Occupant Classification System: Precaution
WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
Do not use seat accessories (such as cushions or covers) that cover the front seats. Also, do not modify or replace the upholstery of the front seat. Doing so may prevent the front passenger airbag system from activating correctly, disable the system or cause the front passenger airbag to inflate accidentally, and result in death or serious injury.
NOTE:
When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the cable is reconnected:
SYSTEM NAME CHART
| System Name | See Procedure |
|---|---|
| Power Window Control System | INITIALIZATION |
- INSPECTION PROCEDURE FOR VEHICLE INVOLVED IN ACCIDENT
- Perform zero point calibration and sensitivity check if any of the following conditions are met:
- The occupant classification ECU is replaced.
- The passenger airbag ON/OFF indicator indicates OFF when the front passenger seat is not occupied.
- The vehicle is brought to the workshop for repair due to an accident or a collision.
- Perform zero point calibration and sensitivity check if any of the following conditions are met: