Transmission Control Switch: Inspection
WARNING: This page is about a different car, the 2008 Lexus IS 350. However, it is still accessible from the selected car via links, so may be relevant.
- INSPECT TRANSMISSION CONTROL SWITCH
- Connect the park/neutral position switch connector.
- Disconnect the transmission control switch connector of the shift lock control unit assembly.
- Measure the resistance according to the value(s) in the table below.
Standard resistance
TESTER CONNECTION SPECIFIED CONDITION CHARTShift Position Tester Connection Specified Condition S, "+" and "-" 3 - 7 Below 1 Ω Except S, "+" and "-" 3 - 7 10 kΩ or higher If the resistance value is not as specified, replace the transmission control switch.