Cruise Control Main Switch: Installation
- INSTALL CRUISE CONTROL MAIN SWITCH
- Install the cruise control main switch with the 2 screws.
Torque: 1.7 to 3.0 N*m (17 to 31 kgf*cm, 15 to 27 in.*lbf)
- Connect the connector.
- Install the cruise control main switch with the 2 screws.
- INSTALL STEERING PAD (See INSTALLATION )
- INSTALL NO. 3 LOWER STEERING WHEEL COVER
- INSTALL NO. 2 LOWER STEERING WHEEL COVER
- CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
- PERFORM INITIALIZATION NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal (See INITIALIZATION ).
- INSPECT SRS WARNING LIGHT
(See DIAGNOSIS SYSTEM )