Accelerator Pedal: Installation

WARNING: This page is about a different car, the 2008 Lexus IS F. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL ACCELERATOR PEDAL ASSEMBLY
1. Install the accelerator pedal with the 2 nuts
  Torque: 5.4 N*m (55 kgf*cm, 48 in.*lbf)
  
  NOTE: Avoid physical shocks to the accelerator pedal.
2. Connect the accelerator pedal sensor connector
  
  Fig 1: Locating Accelerator Pedal Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002